Skip to main content

Smart Lighting Control for Northwest Arkansas Homes

You shouldn't need a map of the light switches to live in your own house.

Whole home lighting control connects every fixture to one system, so you run scenes, schedules, color temperature, and shades from a keypad, phone, or touchscreen. Most high-end lighting systems we design start around $10,000. We plan and program each one room by room for homes in Bentonville, Fayetteville, Rogers, and across Northwest Arkansas.

Whole Home Lighting Control


Most homes in Fayetteville, Bentonville, and across Northwest Arkansas are wired one switch per circuit, and it shows: four or five switches by the door, and nobody remembers which one runs the island pendants. A smart lighting control system replaces that with one plan for the whole house. We connect your fixtures to a single system, so every room can be layered, grouped, and set to scenes while the house keeps a consistent feel from room to room.

Centralizing the lighting also changes the installation. Fewer controls land on your walls, the wiring is cleaner, and you manage everything from the devices you already use. When lighting is part of whole-home automation, the same keypad can handle your audio, climate, and security too.

Choosing the Right Lighting Control System

The right system depends on how much of the house you want to control and when we're brought in. A two-room remodel and a ground-up build in Centerton are different conversations. Our initial cost analysis shows which approach fits before you commit to equipment.

  • Smart dimmers and keypads in key rooms: A good fit for existing homes and remodels. Smart dimmers and keypads replace switch banks in the kitchen, great room, and primary suite.
  • Whole home lighting control: Every room runs on one processor, with keypads, app control, schedules, and scenes throughout the house.
  • Centralized, panel-based systems such as Lutron HomeWorks: Dimming moves to panels in an equipment room. Best for new construction and larger homes, and the natural home for tunable white and Ketra fixtures.

Most of the systems we design are built on Lutron lighting control, and we are a Lutron Platinum dealer. Lutron systems also integrate with Control4 and other automation platforms, so your lighting can work with the rest of the house.

Brushed gold wall keypad with buttons labeled Day, Evening and Nightlight and controls for lighting adjustment.

Keypads, Touchscreens and Apps

Everyone in the house should be able to run the lights without a lesson. High-end lighting control systems give you personalized interfaces on dedicated touchpads or a mobile app. Easy-to-read menus show the status of the lights in each room, and one tap changes them. You can adjust intensity, color and color temperature for single fixtures or whole groups, save your favorite settings, and bring them back anytime.

White square home automation hub with a circular center and small indicator lights mounted on a wall.

Processor

You'll never see the processor, but you'd notice an undersized one: a keypad press that takes a beat to register. The processor carries communication between your controls and your fixtures. A high-end processor responds immediately and accurately, whether the command comes from a keypad, your phone or a schedule. During the initial design stage, our lighting team selects the model based on the bandwidth and processing power your home needs.

Modern Lutron dimmer switch with vertical light bar on a dark faceplate

Dimming Panels

If you want clean walls, the dimming has to live somewhere else. In our professional systems, dimming and control run through panels installed out of sight in an equipment room or utility closet. Panels reduce wall clutter in each room, cut down on wiring infrastructure, and allow more complex programming. They also minimize the need for power boosters and can control fans and motors.

Smart Dimmers and Keypads

A bank of five switches by the door is what we call wall acne, and smart keypads clear it up. Our keypads replace rows of switches and dimmers. They give you one-touch scenes, let you manage lights anywhere in the house, and combine dimmer and switch control in one housing. Flush-mounted models come in matte, metal, and glass finishes in many colors.

Lighting Scene Programming


A scene is a room set the way you like it for a particular moment, saved to one button. We program scenes around how your household actually lives: when you get up, where you work, how you host, and what bedtime looks like. After you move in, we keep adjusting them, because routines change once you're living in the house.

  • Daytime

    Keep to your workday schedule with a “Daytime” lighting scene that activates automatically at 9 a.m. every day. As you head into your home office, bright white-blue ambient lights and desk lights greet you for focus and concentration.

  • Bedtime

    As you head to bed at the end of the day, prepare for restorative sleep with a “Bedtime” scene you can activate from a bedside remote or tablet. The lights don't just dim gradually; they shift to a warm, orange hue that helps you relax.

  • Entertaining

    Entertain in style with a “Party” scene that brings the kitchen and living room lights to a white-blue hue that keeps guests energized through the night. Add landscape lighting to the scene to draw guests out to your outdoor spaces.

  • Movie Night

    Turn your theater into the right viewing environment with a “Movie Night” scene on your handheld remote or touchpad. It dims recessed lights and decorative sconces and turns on floor track lighting so people can move around safely during the movie.

Lighting, Shades and Climate on One System


Daylight is part of your lighting plan whether anyone designs for it or not. In a great room with west-facing glass, late-afternoon sun can overpower the fixtures, add heat, and wash out the finishes you picked. Lighting and shades work best when they're planned together.

Lutron makes both the lighting controls and the motorized shades we install, so the two can run as one system:

  • A “Movie Night” scene lowers the shades as it dims the lights.
  • A morning schedule raises the shades and brings up cooler, brighter white light.
  • Tied into whole-home automation, a single keypad by the door can control a room's lights, shades, and temperature.

Climate belongs in the same plan. Through whole-home automation, your thermostats can join the scenes and schedules that run your lights and shades. One “Away” setting can turn off the lights, lower the shades, and set back the temperature as you leave. At a lake house around Beaver Lake, you can bring up the lights and the heat from your phone before you arrive.

Architectural Lighting Design


You chose the stone, the millwork, and the art for a reason, and lighting decides whether anyone notices them after dark. Good architectural lighting design highlights architectural features, draws attention to high-end furnishings and makes colors read true. The same light should also help you through the day, supporting your mood and the tasks you need to get done. We plan lighting control and design room by room for homes in Fayetteville, Bentonville and across Northwest Arkansas.

Why Work With Our Lighting Designers?

Many homeowners have left lighting to the electrical engineer or the interior designer, and both have bigger jobs on the project. When lighting is someone's second job, it becomes an afterthought in your home. Our designers work across the technical, scientific, and stylistic sides of lighting, so your plan is built for your house rather than a standard layout.

For interior designers, architects and builders: we work inside your scope. We coordinate fixture placement, keypad locations, and finishes with your plan and the build schedule. Bring us in before the walls close, while switch locations and panel space are still decisions on paper.

  • Ongoing training keeps our team current on the latest lighting technology
  • Refined techniques that turn light into part of the architecture
  • Special training in physics, optics, electricity, codes and environmental impact
  • Lower equipment costs through competitive bids and manufacturer partnerships
  • An initial cost analysis that outlines the lighting techniques that will reduce equipment and labor costs
  • Detail-minded designers who plan around your home and the way you live

Essential Layers of Light


A room lit by only one kind of light usually tells you so: strained eyes, harsh shadows, and a space that only works one way. We layer ambient, task, and accent lighting so each room is visually balanced and flexible.

Ambient Light

Lights the entire room softly, using natural sunlight, recessed ceiling lights or pendants.

Task Lighting

Pendant, desk or under-cabinet lights give bright, focused light for specific activities.

Accent Lighting

Highlights artwork, photos and architectural details with light three times brighter than the ambient fixtures.

Tunable White Lighting


The light that helps you focus at 10 a.m. isn't the light you want at 10 p.m. Tunable white fixtures shift color temperature on command, from warm, low light in the evening to crisp, cooler white for cooking or work. That means each scene sets the color of the light as well as its brightness, and you can fine-tune single fixtures or whole groups from your keypad or app.

Tunable white is also where a lighting plan starts working with the time of day. For homes that want the full spectrum, including UV-safe light for art and natural wood finishes, see our luxury lighting page on Ketra.

Color Temperatures at a Glance


Lighting Tones graphic

1,700 K

Red lighting reminiscent of a match flame offers a calming effect in the evening.

2,700 - 3,300 K

Elevate warm interior colors and wood finishes with warm, soft white lighting.

4,100 - 4,150 K

Stay focused on tasks in workspaces or kitchens with cool, white lighting.

5,500 - 6,000 K

Enjoy vertical daylight hues in the afternoon to stimulate your mood and décor.

6,500 K

Deliver lighting in main living areas with hues reminiscent of overcast skies.

15,000 - 27,000 K

Reserve clear blue lighting for activities that require ample energy or focus.

1,850 K

Craft the perfect date night light with romantic candlelit or sunset hues.

3,000 K

Facilitate relaxation with neutral white lighting while reading in the family room.

5,000 K

Employ crisp-white daylight hues to highlight artwork and bolster security.

6,200 K

Blue-white light mimics natural sunlight and delivers bright, energizing illumination.

6,500 - 10,500 K

Turn to blue hues for hyper-focused task lighting in your primary workspaces.
Lighting Tones

1,700 K

Match flames & low-pressure sodium lamps

2,700 - 3,300 K

Incandescent lamps & soft-white flourescent lamps

4,100 - 4,150 K

Moonlight; cool-white lamps

5,500 - 6,000 K

Vertical daylight

6,500 K

Daylight; overcast fluorescent lamps

15,000 - 27,000 K

Daylight; overcast fluorescent lamps

1,850 K

Candle Flame, sunrise, sunset

3,000 K

Warm-white fluorescent lamos

5,000 K

Horizon daylight

6,200 K

Xenon short-arc lamp

6,500 - 10,500 K

LCD or CRT Screen

Architectural Fixtures


A ceiling full of identical cans lights a room evenly and flatly. For layered lighting to work, we specify a range of lighting fixtures throughout your home. High-end pendants, downlights and track lights add depth and beauty while handling your everyday tasks, and each one has a role.

modern design of linear pendants

Linear Pendants

Design-Forward Lighting.
Pendant lights come in a wide range of colors and finishes. They add a spark to your décor while covering ambient or task lighting needs, hanging from the ceiling or set within a track system.
downlights with LED lighting

Downlights

Illumination Without Clutter.
Downlights mainly provide ambient light, though some applications use them for task or accent lighting. They're recessed or flush-mounted in the ceiling, in round or square trims to match your décor.
Lighting in the ceiling in an older home

Retrofit Downlights

Remodel Without Limitations.
Replacing outdated fixtures doesn't have to mean a ceiling repair. Our retrofit downlights have low-profile designs that fit most standard recessed housings. Choose from our collection of high-end tunable LED fixtures in round or square trims.
track lighting in an older bathroom

Track Lighting

Bright, Versatile Spotlights.
Track lighting is a flexible answer for accent and task lighting. Adjustable spotlights on a track or rail can showcase artwork or light up cabinets, and straight, round, and curved track models widen your design choices.

Why Choose AV Design Consultants for Lighting Control


You'll live with a smart lighting control system for years, so who designs it and who answers the phone afterward matters as much as the hardware.

  • Local expertise: We're based in Tontitown and work in homes from Bentonville to Eureka Springs. We plan around Ozark light and how the seasons change the way a room is used.
  • Custom design: Every project starts with a consultation in your home or at our showroom. Your plan is coordinated with your builder, architect, or interior designer.
  • White-glove installation: Our technicians work carefully in homes with fine finishes and art collections, and on your schedule.
  • Ongoing support: We program your scenes, train you on the system, and stay on for remote support, updates, and seasonal adjustments.

Lighting Control Across Northwest Arkansas


We design and install lighting control throughout Northwest Arkansas: new construction in Centerton, historic homes in Fayetteville, and lake houses around Beaver Lake, where controlling the lights from out of town matters.

Service Areas
  • Bentonville
  • Fayetteville
  • Rogers
  • Springdale
  • Centerton
  • Beaver Lake
  • Eureka Springs

Don't see your town? Call (479) 365-2201. We work in more communities across Northwest Arkansas and will confirm availability for your project.

Smart Lighting Control FAQs


How much does whole home lighting control cost?

It depends on the number of rooms, the platform, the fixtures, and whether the work is new construction or a remodel. Most high-end lighting systems we design start at around $10,000, and larger whole-home designs go well beyond that. Our initial cost analysis gives you a tailored estimate before you commit.

Can lighting control be added to an existing home?

Yes. We regularly add lighting control to existing homes in Northwest Arkansas without a full renovation. Smart dimmers and keypads can replace switch banks room by room, and our retrofit downlights fit most standard recessed housings. We assess your architecture and wiring first, then recommend the least disruptive path.

Can I keep my existing light fixtures?

Often, yes. During the walkthrough, we check each fixture and recommend replacing only the ones that won't dim cleanly or don't fit the lighting plan.

When should we bring you into a new build?

As early as you can, ideally before the walls close. Early planning lets us coordinate keypad locations, panel space, and wiring with your builder, architect and interior designer, while those choices are still inexpensive to change.

Does lighting control work with motorized shades and home automation?

Yes. Lutron lighting and motorized shades operate as a single system, so a single scene can control both. Lutron systems also integrate with Control4 and other automation platforms that manage audio, climate, and security.

How long does a lighting control project take?

Design and planning typically take four to six weeks, followed by installation and final programming. On new construction, the schedule follows the build.

Do you work with interior designers and architects?

Yes. We regularly work inside a designer's or architect's lighting scope, coordinating fixtures, controls and finishes so the technology supports the design instead of competing with it.

Talk to a Lighting Expert About Your Home

Whether you're framing a new home in Bentonville or living with a wall of switches in Fayetteville, smart lighting control starts with a conversation about how you use each room. From design through installation and programming, our lighting team handles every step and stays with you after move-in.