For screen reader problems with this website, please call479-365-22014 7 9 3 6 5 2 2 0 1Standard carrier rates apply to texts.

Sign Up for Our Monthly Newsletter Today!

Atlona® 4K/UHD Remote Powered HDMI Over 100 M HDBaseT Transmitter

Model #: AT-UHD-EX-100CE-TX-PD
135330
Atlona
At a Glance
The AT-UHD-EX-100CE-TX-PD is part of the Atlona UHD-EX Series of HDBaseT extenders. See below for a complete listing of transmitters, receivers, and extender kits.
Call for Best Price
$99,999.00Save $NaN

Get to know this product.

The Atlona AT-UHD-EX-100CE-TX-PD is an HDBaseT transmitter for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass-through and RS-232 control. It transmits video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The AT-UHD-EX-100CE-TX-PD is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management. This device is externally powered via Power over Ethernet, and is ideal for use with Atlona switchers with PoE-equipped HDBaseT inputs, including the AT-UHD-CLSO-612ED, AT-UHD-CLSO-840, and AT-UHD-SW-5000ED.

The AT-UHD-EX-100CE-TX-PD transmitter simplifies system design when powered by an Atlona switcher with HDBaseT inputs, reducing cost and complexity by eliminating the need for a power supply. It can also be paired with the AT-UHD-EX-100CE-RX-PSE receiver and AT-HDVS-200-RX scaling receiver, both delivering PoE. Installer-friendly features include a rack-mountable form factor that allows four transmitters to share a single 1U rack tray, and a front mounted USB port for easy firmware updates.

This transmitter is ideal for use in applications where:

  • HDBaseT transmitters need to be installed in a location where local AC power may not be available, such as a lectern or conference room table
  • 4K/UHD signal extension and HDCP 2.2 compliance are necessary in the system design

Product Compatibility

The AT-UHD-EX-100CE-TX-PD is compatible with the AT-UHD-EX-100CE-RX-PSE receiver, and both products are available together as a kit. This transmitter is also ideal for Atlona switchers and matrix switchers with HDBaseT inputs. See below for a list of compatible products. This HDBaseT transmitter is also ideal for use with the AT-OME-RX11 receiver with audio de-embedding, as well as the AT-OME-RX21 scaling receiver with local HDMI input and audio de-embedding.

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

  • Compatible with Ultra High Definition sources and displays
  • Full support of 4K/UHD streaming services and playback devices

HDCP 2.2 compliant

  • Adheres to latest specification for High-bandwidth Digital Content Protection
  • Allows protected content stream to pass between devices

Supports 4K HDR10 @ 24 Hz

  • Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)

Remotely powered via PoE (Power over Ethernet)

  • IEEE 802.3af PoE Powered Device (PD)
  • Power for transmitter is supplied by receiver over HDBaseT
  • Saves time and integration costs

AV, Ethernet, power, and control over HDBaseT

  • Delivers 4K/UHD video, embedded audio, 100Base-T Ethernet, power, and control through a single cable
  • Eliminates multiple cable runs between source, control system, router, and display

Extended distance HDMI extension

  • Transmits HDMI signals up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
  • Uses easy-to-integrate category cable for low-cost, reliable system installation

Extends RS-232, CEC, and Ethernet control signals

  • Control signals travel over HDBaseT link to device for maximum control system flexibility
  • Simplifies integration of source, control system, and display
  • * The AT-UHD-EX-100CE-TX-PD does not include I/O ports for IR control signals extended over HDBaseT. If IR control over HDBaseT is required, please refer to the AT-UHD-EX-100CE-TX.

Rear Panel I/O Connectors

  • Placement of ports on rear panel simplifies wire management
  • Saves installation time and eliminates clutter

Multi-channel Audio Compliant

  • Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, and DTS:X™
  • Allows any multi-channel audio stream to be used within a professional audio system

Field-updatable firmware

  • Front panel USB port provides an easy means for device updates
  • Ensures long-term system return on investment

Front panel Power and Link status LEDs

  • LED indicators provide power and HDBaseT link status information
  • Provides easy setup and troubleshooting

Low-profile, 1 inch (25 mm) high quarter rack-width enclosure

  • Easy installation into racks and confined spaces
  • Keeps devices out-of-sight when placed in public spaces

Included accessories

  • User guide, mounting brackets

Award-winning 10 year limited product warranty

  • Ensures long-term product reliability and performance in residential and commercial systems
  • Specify, purchase, and install with confidence
Useful Documents
Specifications

General

Consumption15.2W (when paired with RX)
SupplyInput: AC100~240V 50/60Hz; Output: DC 48V/0.83A
H x W x D0.98 x 4.29 x 5 (inch)
H x W x D w/Ears1.06 x 4.69 x 5 (inch)
Weight0.86lbs

Misc. Specs

Product Weight (lbs.)0.86
Manufacturer Warranty10 Year
WarningProposition 65 Warning for California Residents